Ensuring the safety of both guests and operators while using the 360 photo booth is crucial to avoid any accidents. Here are some essential safety recommendations！！！

一、Pre-Use Checklist

Equipment Check

1. Ensure the rotating platform operates smoothly, with no jerks or unusual sounds.
2. Check that the rotating arm is secure and free of any loose or structural issues.
3. All cables and connections should be safely positioned and out of walking paths to avoid tripping hazards.

Surface Conditions

1. Place the 360 photo booth on a flat, stable surface to prevent tipping or wobbling.
2. Avoid using the 360 photo booth on slippery or uneven floors, such as carpets that are too soft.

二、During Operation

Children and Pet Restrictions

1. Do not allow children to operate the 360 photo booth alone—they should always be supervised by an adult. Curious children may attempt to touch the rotating arm, which increases the risk of injury.
2. Ensure there are no pets in the area to prevent interference with the equipment.

Guest Positioning

1. Ensure guests stand in the center of the platform, away from the edges.
2. Do not exceed the platform’s maximum weight capacity (usually provided by the manufacturer).

Movement Restrictions

1. Remind guests to remain standing once the device is activated, avoiding crouching or jumping.
2. Do not allow guests to grab the rotating arm or engage in any actions that could interfere with its rotation.

Safe Distance

1. Ensure there is enough space around the device (at least 3 feet or 1 meter) to prevent bystanders from being hit by the rotating arm.
2. Use barriers or clear signage to remind others to stay clear of the device.

三、Emergency Protocols

Emergency Stop Button

1. Ensure the device is equipped with an easily accessible emergency stop button, and make sure both operators and guests are aware of its location and how to use it.
2. In case of malfunction (e.g., uncontrollable spinning), immediately disconnect the power.

First Aid Kit

1. Keep a first aid kit on-site in case of emergencies.

四、Equipment Maintenance

Regular Maintenance

1. Clean the rotating platform and mechanical components regularly to prevent dust accumulation that could affect the performance.
2. Inspect the electrical connections for any damage or wear.

五、Proper Transport

1. When moving the 360 photo booth, use the original transport flight case and make sure all components are securely fixed.

By following these safety measures, the likelihood of accidents can be greatly reduced, ensuring the 360 photo booth provides a safe and enjoyable experience for your guests.

If this article is helpful, please share it with others who might benefit from it. Thank you!